CO2 Mixer 200

This Co2 Mixer / Reactor 200 Min is for aquariums up to 200 litres.

The Mixer / Reactor is placed outside the aquarium. This mixer is placed between the external filter and the inflow to the aquarium.

Due to the power of the filter, the CO₂ is mixed in the housing, which allows it to be absorbed even better than with regular diffusers or bubble counters.

In the Mixer / Reactor, CO₂ is added via a 6mm hose that connects to the push-fit coupling on the head. Inside the housing, the CO₂ is further reduced and mixed with the water.

The return flow helps distribute it better in the aquarium water.

PLEASE NOTE: Set the pressure regulator of the CO₂ cylinder to a maximum of 0.5 bar.
The head is equipped with 22/16mm hose connectors.

Height is approx. 20cm
Width is approx. 12 cm

Bubble counter is not included.

The special mounting bracket is optional.

Installation:

-Connect the CO₂ mixer to the outflow of the external filter.
-Connect the CO₂ hose in the middle of the mixer head.
-Tighten the head firmly onto the canister.
-Restart the filter and turn on the CO₂ system.